FAQ: Can I connect capacitive loads greater than 150 uF to the output of the N678xA power modules?

Yes, you can connect capacitive loads with much greater capacitances than 150 uF to the output of the N678xA power modules. However, you must remember that the output current will be limited to the rated current of the power module. Refer to I=C (DeltaV/DeltaT). Additionally, you must also set the Output Bandwidth of the power module to either Low or High3, and follow the wiring requirements in the Installation section of the manual.

Applies to: N6781A, N6782A, N6784A, N6785A, N6786A

Select Home to return to the table of contents for more FAQs. Visit our Power Products Forum for additional topics and discussions. Read technical postings on our Power Blog – Watt’s Up?